Does anyone have the Rigicon Infal10 AX?

The final frontier. Deciding when, if and how.
arazon
Posts: 30
Joined: Thu Feb 26, 2026 8:23 pm

Does anyone have the Rigicon Infal10 AX?

Postby arazon » Tue Oct 13, 2026 12:40 am

Does anyone have the Rigicon Infal10 AX? How is it length wise? Any issues?

1984ptc
Posts: 222
Joined: Sun Jan 25, 2026 5:33 am

Re: Does anyone have the Rigicon Infal10 AX?

Postby 1984ptc » Tue Oct 13, 2026 12:31 pm

I have one. Love mine. Length is back to 7.25 inches. 2 o clock angle. Super hard. No wobble. Feels natural. No dog ears. 6-6.5 inches flaccid after 2 pumps post deflation. Girth is good as i havent lose any. 6.5 inches around. 0.5 inches from filler.
Became bionic 3/2026. Hakky - rigicon infla10ax 23 cm (22+1 rte). Chronic ed - tried pills, ved, bimix/trimix. Had mild venous leak on doppler. Took the plunge when ultrasound showed fibrosis and i knew it was only a matter of time before i needed one

ready2go
Posts: 861
Joined: Fri Aug 25, 2023 7:47 pm

Re: Does anyone have the Rigicon Infal10 AX?

Postby ready2go » Wed Oct 14, 2026 4:28 am

1984ptc wrote:I have one. Love mine. Length is back to 7.25 inches. 2 o clock angle. Super hard. No wobble. Feels natural. No dog ears. 6-6.5 inches flaccid after 2 pumps post deflation. Girth is good as i havent lose any. 6.5 inches around. 0.5 inches from filler.


well thats good to hear , and how about the filler ?
what type did you recieve and how many cc's did you get ,and was there swelling afterwards ,if so how long before it subsided if you dont mind ?
i had HA filler here in the philippnes . i got 20cc at once , and according to info i can find on an amount per session ,that is not recommend . in the clinic it looked good , but getting home 7 hours later the swelling made it look disfigured , not an even swelling either . its was lopisided , more on one side .
it didnt go down much after 8 days , and despite the clinice engorouging me to wait longer ,i decided to have it dissovoled . the clinic would not disclose what brand of HA filler it as other than that is was korean . not a practice that garners confindence .
i am still interested to get enough to plump out my malleable when i am not aroused , but dont want to go through that stubborn swelling aftermath .
your experience with the filler would be helpfull
American , retired in the philippines .
tactra malleable 13 mm ,in new delhi India . march 2024

John Dday
Posts: 156
Joined: Thu Sep 05, 2024 8:30 pm

Re: Does anyone have the Rigicon Infal10 AX?

Postby John Dday » Wed Oct 14, 2026 5:20 pm

Yes I have the AX but only on week 10.
I was impressed by the support Rigicon gave me. I live in a remote part of Aus (Tasmania) and the Rep made an appointment to see me here, and explain their system through a hands on try.
Their tube clamping system is amazing. It is a more modern design.
Being prostatectomy I love the flaccid feel and look. It makes cycling no problem at all.
1955. I have had ED for years. We were planning to go for an implant in October 2024. Heart attack & Stent then prostatectomy. Finally 11/8/26 Rigicon Infla10AX 22cm

1984ptc
Posts: 222
Joined: Sun Jan 25, 2026 5:33 am

Re: Does anyone have the Rigicon Infal10 AX?

Postby 1984ptc » Thu Oct 15, 2026 6:55 am

ready2go wrote:
1984ptc wrote:I have one. Love mine. Length is back to 7.25 inches. 2 o clock angle. Super hard. No wobble. Feels natural. No dog ears. 6-6.5 inches flaccid after 2 pumps post deflation. Girth is good as i havent lose any. 6.5 inches around. 0.5 inches from filler.


well thats good to hear , and how about the filler ?
what type did you recieve and how many cc's did you get ,and was there swelling afterwards ,if so how long before it subsided if you dont mind ?
i had HA filler here in the philippnes . i got 20cc at once , and according to info i can find on an amount per session ,that is not recommend . in the clinic it looked good , but getting home 7 hours later the swelling made it look disfigured , not an even swelling either . its was lopisided , more on one side .
it didnt go down much after 8 days , and despite the clinice engorouging me to wait longer ,i decided to have it dissovoled . the clinic would not disclose what brand of HA filler it as other than that is was korean . not a practice that garners confindence .
i am still interested to get enough to plump out my malleable when i am not aroused , but dont want to go through that stubborn swelling aftermath .
your experience with the filler would be helpfull


Definitely go hyaluronic before any permanent filler. And if you have an implant, id go with an implant urologist like hakky or perito or clavell. The location of the ha is what matters. And the amt depends on how long you are. Foundational layer alone- i needed 14 units. Hakky did his in 3 columns. It looked good immediately afterwards. Never had to dissolve ha. Brands ive tried are revanesse versa plus, restylane plus, and more recently evolysse form. Been topping up with a few ccs every now and then. Once youre bodys used to it and youre sure you like it, then you can look into getting bellafill which is somewhat permanent, or at least 5 yrs long.
Became bionic 3/2026. Hakky - rigicon infla10ax 23 cm (22+1 rte). Chronic ed - tried pills, ved, bimix/trimix. Had mild venous leak on doppler. Took the plunge when ultrasound showed fibrosis and i knew it was only a matter of time before i needed one

Nozigan8667
Posts: 24
Joined: Mon Nov 24, 2025 5:30 pm

Re: Does anyone have the Rigicon Infal10 AX?

Postby Nozigan8667 » Fri Oct 16, 2026 10:19 am

1984ptc wrote:I have one. Love mine. Length is back to 7.25 inches. 2 o clock angle. Super hard. No wobble. Feels natural. No dog ears. 6-6.5 inches flaccid after 2 pumps post deflation. Girth is good as i havent lose any. 6.5 inches around. 0.5 inches from filler.


Nice to read! How many pumps? And how long to full erection, and can you inflate with one hand?

Thank you

Chris1967
Posts: 157
Joined: Sun Jun 01, 2025 12:14 pm

Re: Does anyone have the Rigicon Infal10 AX?

Postby Chris1967 » Fri Oct 16, 2026 6:36 pm

Hello, I have a Rigicon Infla X and I am very satisfied. Before the intervention I trained very intensively with a ved. I have no loss of length. Since my lower cavernous body and the glans continue to swell during excitement, I also have no big loss of circumference. The X model is very hard. However, it needs many pumps until then. I pump 30 to 40 full plus another 30 half and then a few more mini pumps bus to absolute hardness
58 years old, living in Germany, ED since 2004,
03.02.2026. Rigicon 10 Infla X Pulse 22cm + 2cm by Prof. Dr. Osmonov, Germany.


Return to “Implants”

Who is online

Users browsing this forum: ClaudeBot, Google [Bot], Jimmy James and 82 guests