Page 1 of 4

Is 6 inch girth midshaft with a titan possible?

Posted: Sat May 27, 2023 12:29 pm
by Hillywilly
As I understand it per coloplasts website the max diameter of both cylinders combined is 42mm so Just wondering if anyone has reached a 6 inch midshaft girth with your titan? If so, can you please provide your pre-op and post-op girth measurement and reason for the implant?

Re: Is 6 inch girth midshaft with a titan possible?

Posted: Sat May 27, 2023 12:36 pm
by Cnidium
I had 5.67-5.8 mid shaft girth and 6.0-6.3 near-base girth when I had a 24cm titan. Fluctuation depending on how close 100% pumped I was. Regular VED use put me at the upper bounds.

Re: Is 6 inch girth midshaft with a titan possible?

Posted: Sat May 27, 2023 1:52 pm
by Hillywilly
Cnidium wrote:I had 5.67-5.8 mid shaft girth and 6.0-6.3 near-base girth when I had a 24cm titan. Fluctuation depending on how close 100% pumped I was. Regular VED use put me at the upper bounds.


Thanks Cnidium I have been using VED for a week now excited to see where it gets me. I believe you are considering urofill as well? Can I ask how much girth you are thinking you will add?

Re: Is 6 inch girth midshaft with a titan possible?

Posted: Sat May 27, 2023 3:04 pm
by Cnidium
Hillywilly wrote:
Cnidium wrote:I had 5.67-5.8 mid shaft girth and 6.0-6.3 near-base girth when I had a 24cm titan. Fluctuation depending on how close 100% pumped I was. Regular VED use put me at the upper bounds.


Thanks Cnidium I have been using VED for a week now excited to see where it gets me. I believe you are considering urofill as well? Can I ask how much girth you are thinking you will add?


Just .5in, which im guessing will be 10-12cc's of filler. Purpose to round out implant, add to top/bottom only, not sides

Re: Is 6 inch girth midshaft with a titan possible?

Posted: Sun May 28, 2023 5:58 am
by ThailandBound
Cnidium wrote:
Hillywilly wrote:
Cnidium wrote:I had 5.67-5.8 mid shaft girth and 6.0-6.3 near-base girth when I had a 24cm titan. Fluctuation depending on how close 100% pumped I was. Regular VED use put me at the upper bounds.


Thanks Cnidium I have been using VED for a week now excited to see where it gets me. I believe you are considering urofill as well? Can I ask how much girth you are thinking you will add?


Just .5in, which im guessing will be 10-12cc's of filler. Purpose to round out implant, add to top/bottom only, not sides


Please keep us posted if you follow through. I’m thinking i might like to improve the appearance of my now oval full-max Titan. Curious if it’s worth it.

Re: Is 6 inch girth midshaft with a titan possible?

Posted: Sun May 28, 2023 6:22 am
by Howling8
I’ve gotten mine to 6’ at the base and 5.6 mine shaft fully pumped and a little more if I’m aroused and engorged. Lots of Dr Perito exercises daily

Re: Is 6 inch girth midshaft with a titan possible?

Posted: Sun May 28, 2023 7:07 am
by Totitoti
Also on the same boat, my pre op girth was 6.5 currently at 5.25, awaiting my VED to see if i can get an improvement on girth.

VED i got from amazon was
https://www.amazon.com/dp/B00PJ5MMPC?ps ... ct_details

before and after pics at
viewtopic.php?f=6&t=22140&p=206629#p206629

Re: Is 6 inch girth midshaft with a titan possible?

Posted: Sun May 28, 2023 1:25 pm
by Journeyman
I just got the green light to start cycling Thursday so I've been taking measurements to see if they increase over time. At max pump I measure 5 " behind glans, 5.5 " midshaft, 6 " base . I'm pretty happy with these results even if they never change. On a side note I was helping the wife straighten up the house today ( try to build up some pussy points ) and as I was changing out the empty paper towel roll, I looked at it and thought , " that's pretty girthy, I wonder what that measures "? So in the name of science , I took the paper towel roll to my room and measured it ..... 5.5 " in circumference . That's pretty big ! Be proud of 5.5 " if thats what you're packing. Anything more is a bonus

Re: Is 6 inch girth midshaft with a titan possible?

Posted: Sun May 28, 2023 1:35 pm
by Hillywilly
Journeyman wrote:I just got the green light to start cycling Thursday so I've been taking measurements to see if they increase over time. At max pump I measure 5 " behind glans, 5.5 " midshaft, 6 " base . I'm pretty happy with these results even if they never change. On a side note I was helping the wife straighten up the house today ( try to build up some pussy points ) and as I was changing out the empty paper towel roll, I looked at it and thought , " that's pretty girthy, I wonder what that measures "? So in the name of science , I took the paper towel roll to my room and measured it ..... 5.5 " in circumference . That's pretty big ! Be proud of 5.5 " if thats what you're packing. Anything more is a bonus



Yes, 5.5 is plenty but when you go down from a natural 6 to 5.5 IPP G you probably wont be as happy as if you went from natural 5 to 5.5 IPP G. I just want the filler to tighten up some of the skin that is slightly looser.

Re: Is 6 inch girth midshaft with a titan possible?

Posted: Sun May 28, 2023 1:52 pm
by Journeyman
Hillywilly wrote:
Journeyman wrote:I just got the green light to start cycling Thursday so I've been taking measurements to see if they increase over time. At max pump I measure 5 " behind glans, 5.5 " midshaft, 6 " base . I'm pretty happy with these results even if they never change. On a side note I was helping the wife straighten up the house today ( try to build up some pussy points ) and as I was changing out the empty paper towel roll, I looked at it and thought , " that's pretty girthy, I wonder what that measures "? So in the name of science , I took the paper towel roll to my room and measured it ..... 5.5 " in circumference . That's pretty big ! Be proud of 5.5 " if thats what you're packing. Anything more is a bonus



Yes, 5.5 is plenty but when you go down from a natural 6 to 5.5 IPP G you probably wont be as happy as if you went from natural 5 to 5.5 IPP G. I just want the filler to tighten up some of the skin that is slightly looser.

Yeah... if I had loose skin I'd want it fixed too . Good luck to ya