Ams 700 cx valve
-
- Posts: 50
- Joined: Fri Sep 21, 2018 9:44 pm
Ams 700 cx valve
Ok I’ve been monkeying around with this thing and am ready to try and pump but I want to be sure I can release it after I do it. I didn’t want to post but I went for a motorcycle ride and the only thing that bothered me was my semi hard dick. I can’t finf the damn valve to release the pressure is there any tricks to this? I’m sure it’s “beating and dead horse” but I’m at my wits end I’ve been trying and now my ball sacks sore and I was hoping to Fuk here in the next few days. Please help of give me a link to a previous post. TIA
AMS 700 cx implanted on 9/14/18 in Iowa city, Iowa
42 years old peyronies disease
42 years old peyronies disease
-
- Posts: 1275
- Joined: Tue Mar 05, 2013 8:15 pm
Re: Ams 700 cx valve
Take a hot bath. Your scrotum will loosen up and make it easier to feel the button.
-
- Posts: 51
- Joined: Tue Sep 25, 2018 7:14 pm
Re: Ams 700 cx valve
Day 27 for me and sex the first time tonight. I had called Technical support (Jaime) yesterday because I was having prob pumping and deflating. Told me to “Burp it” by squeezing the bulb and hitting the deflate button one time at the same time. A bath does help to loosen up the scrotum and even tho I thought I had it mastered last night I still had probs deflating this evening. I went back to the bath and I deflated fairly quick. You’ll feel that “gush” after you deflate.
48 yrs old, married 24 years. Southwest Virginia. Periodic ED for 10+ year, ruptured penis June 2017 with wife. Multiple ED meds with half wood. Implant Oct 1 2018 AMS 700 CX 18cm X 12mm by Dr. Woodworth UT Medical Knoxville Tn
Re: Ams 700 cx valve
Opie52 wrote:Ok I’ve been monkeying around with this thing and am ready to try and pump but I want to be sure I can release it after I do it. I didn’t want to post but I went for a motorcycle ride and the only thing that bothered me was my semi hard dick. I can’t finf the damn valve to release the pressure is there any tricks to this? I’m sure it’s “beating and dead horse” but I’m at my wits end I’ve been trying and now my ball sacks sore and I was hoping to Fuk here in the next few days. Please help of give me a link to a previous post. TIA
Many guys, including me, had difficulty locating the release button. Did you get the key chain model of the pump??? That proved very helpful to me. If you still have swelling (and I doubt that far post op that you do) you could have problems finding it. Finally did it maybe turn 180 degrees and the button is now on the inside?? Good luck.

Larry
-
- Posts: 50
- Joined: Fri Sep 21, 2018 9:44 pm
Re: Ams 700 cx valve
I didn’t get anything to Practice with but I did call the number and she told me how to bleed off the air bubbles and it’s s little easier. I can still only get 4 pumps before the bulb gets too hard.
AMS 700 cx implanted on 9/14/18 in Iowa city, Iowa
42 years old peyronies disease
42 years old peyronies disease
Re: Ams 700 cx valve
Opie52 wrote:I didn’t get anything to Practice with but I did call the number and she told me how to bleed off the air bubbles and it’s s little easier. I can still only get 4 pumps before the bulb gets too hard.
I was like that too. It will change.

Larry
-
- Posts: 50
- Joined: Fri Sep 21, 2018 9:44 pm
Re: Ams 700 cx valve
Since it’s so hard to pump up at the moment does a vacuum pump kind of take its place until it gets easier? I don’t want scarring and things to make it worse.
AMS 700 cx implanted on 9/14/18 in Iowa city, Iowa
42 years old peyronies disease
42 years old peyronies disease
-
- Posts: 73
- Joined: Tue Mar 18, 2014 2:21 pm
Re: Ams 700 cx valve
opie
do not use ved this soon if you have unhealed tissue and use vedit could cause internal damage ie bleeding then infection then all hell brakes lose. like larry said it could be rotated on axes. try and feel and slide fingers from the side of you sack the skin is thinner on the side and less sensitive inflated or deflated the ved dose not pull liquid into implant cyl..patience it will happen then put on your war face
mike
do not use ved this soon if you have unhealed tissue and use vedit could cause internal damage ie bleeding then infection then all hell brakes lose. like larry said it could be rotated on axes. try and feel and slide fingers from the side of you sack the skin is thinner on the side and less sensitive inflated or deflated the ved dose not pull liquid into implant cyl..patience it will happen then put on your war face
mike
74yr.old married 54yrs pc11/13 rad seed implants started ved 1/14 .implanted 11/20/2016 ams lgx 18+1 11 up 8 down 6 1/2 flaccid 7 5/8
local uro sanford health,
s. central N.D.
MIKE
local uro sanford health,
s. central N.D.
MIKE
-
- Posts: 50
- Joined: Fri Sep 21, 2018 9:44 pm
Re: Ams 700 cx valve
I’m glad I just read this because I just bought one, thanks for the “heads up”
AMS 700 cx implanted on 9/14/18 in Iowa city, Iowa
42 years old peyronies disease
42 years old peyronies disease
Re: Ams 700 cx valve
Opie52 wrote:I’m glad I just read this because I just bought one, thanks for the “heads up”
Yes, wait until incision is healed.
Larry
Who is online
Users browsing this forum: amazonbot, ClaudeBot, Google [Bot], Kimball, YandexBot and 6 guests