How quickly can you inflate your implant?

[Rodsmen]

check this:
https://implantporn.com/product/penile- ... uring-sex/

how to inflate during sex?
Dan

As previously noted, while I can get hard initially with ~30 pumps, time, and stretching, will reduce the stiffness. The great news is that the stretching means that adding more pumps along the way gets you bigger and harder. It’s easily measurable. I keep doing that during anal sex, and can add a lot of size and harness over time. With oral sex, I don’t pump fully hard, as it’s too difficult for the blower, but if I start fully soft, they are thrilled when I pump while they suck, which is how it would occur naturally.

I have pumped while fully inserted during anal sex with hundreds of partners now, and every single one of them have been thrilled with the feeling, which they are very unlikely to have ever felt before. (It’s a great dramatic foreshadowing to their also feeling what is often a first for them—feeling their “second holes” being fully penetrated and massaged.)

[LGXDownunder]

subhash, I'm also trying to identify what the "burp" is. I have a Tenacio pump and it never makes a pop sound. On the first pump I initially feel some resistence, but once that gives way its easy to pump. I associate that with the pump valves switching from deflate mode to inflate mode. Is that initial resistance what you're referring to as the "burp" ?

= Chuck

Burping the bulb means hearing the pop sound after which one can inflate. I dont think anyone can inflate without burping the bulb.

Chuck, I think it may just be that everyone makes up their own description for the same thing. I can only speak from the perspective of the AMS MS pump. When I squeeze it initially the resistance gives way and it "feels" like a "pop", which is obviously releasing the valve mechanism. But I can't actually hear anything, and my hearing is excellent - I can hear a pin drop three rooms away . I imagine it's possible that some guys could have slightly noisy pumps that do make a sound. As I've broken the implant in I now do sometimes hear a slight noise when deflating, vaguely like a slow air leak in a tyre. I doubt anyone else could hear it though.
John

[dan_bionic]

check this:
https://implantporn.com/product/penile- ... uring-sex/

how to inflate during sex?
Dan

As previously noted, while I can get hard initially with ~30 pumps, time, and stretching, will reduce the stiffness. The great news is that the stretching means that adding more pumps along the way gets you bigger and harder. It’s easily measurable. I keep doing that during anal sex, and can add a lot of size and harness over time. With oral sex, I don’t pump fully hard, as it’s too difficult for the blower, but if I start fully soft, they are thrilled when I pump while they suck, which is how it would occur naturally.

I have pumped while fully inserted during anal sex with hundreds of partners now, and every single one of them have been thrilled with the feeling, which they are very unlikely to have ever felt before. (It’s a great dramatic foreshadowing to their also feeling what is often a first for them—feeling their “second holes” being fully penetrated and massaged.)

That's right, for oral start with 60-70% as it's more natural than an iron-hard dick, which can even cause pain by oral/throat action.
And for vaginal or anal one can pumped harder while inside and for your partner is a great feeling when your dick gets harder during action.

Dan

[Kodixx]

John, thanks -- I suspected that was it but wanted to make sure I wasn't missing something

- Chuck

Chuck, I think it may just be that everyone makes up their own description for the same thing. When I squeeze it initially the resistance gives way and it "feels" like a "pop", which is obviously releasing the valve mechanism.

[LGXDownunder]

John, thanks -- I suspected that was it but wanted to make sure I wasn't missing something

- Chuck

Chuck, I think it may just be that everyone makes up their own description for the same thing. When I squeeze it initially the resistance gives way and it "feels" like a "pop", which is obviously releasing the valve mechanism.

[subhash]

subhash, I'm also trying to identify what the "burp" is. I have a Tenacio pump and it never makes a pop sound. On the first pump I initially feel some resistence, but once that gives way its easy to pump. I associate that with the pump valves switching from deflate mode to inflate mode. Is that initial resistance what you're referring to as the "burp" ?

= Chuck

Burping the bulb means hearing the pop sound after which one can inflate. I dont think anyone can inflate without burping the bulb.

Chuck, I think it may just be that everyone makes up their own description for the same thing. I can only speak from the perspective of the AMS MS pump. When I squeeze it initially the resistance gives way and it "feels" like a "pop", which is obviously releasing the valve mechanism. But I can't actually hear anything, and my hearing is excellent - I can hear a pin drop three rooms away . I imagine it's possible that some guys could have slightly noisy pumps that do make a sound. As I've broken the implant in I now do sometimes hear a slight noise when deflating, vaguely like a slow air leak in a tyre. I doubt anyone else could hear it though.
John

John and LGXDownUnder, thanks a ton for your responses. By the 'pop' sound, i of course meant releasing the valve mechanism/ feeling the resistance unlock. My issue is that when I give that first firm and quick pump, I am unable to release the valve mechanism. It takes me several attempts. Are you both able to do it in the first attempt? I mean I am unable to put it in the inflate mode. Any guidance from any of my bionic bros on how to do this would be highly appreciated

[LGXDownunder]

John and LGXDownUnder, thanks a ton for your responses. By the 'pop' sound, i of course meant releasing the valve mechanism/ feeling the resistance unlock. My issue is that when I give that first firm and quick pump, I am unable to release the valve mechanism. It takes me several attempts. Are you both able to do it in the first attempt? I mean I am unable to put it in the inflate mode. Any guidance from any of my bionic bros on how to do this would be highly appreciated

For me it always releases on the first press of the bulb. I can't recall having to press more than once to get it started, so far. I'm actually finding that the inflation process is getting faster the more I've been cycling. I'm now pretty much rock hard in about 30 pumps/seconds or less. That's for the MS pump, perhaps Chuck may comment on the Tenacio pump if he reads this. It may also be helpful if you let us know which pump you have. I think you said that it has been taking up to 2 hours to inflate? If so that seems very unusual. Have you tried pressing the release button or valve before pumping?

[frank66665]

subhash, I'm also trying to identify what the "burp" is. I have a Tenacio pump and it never makes a pop sound. On the first pump I initially feel some resistence, but once that gives way its easy to pump. I associate that with the pump valves switching from deflate mode to inflate mode. Is that initial resistance what you're referring to as the "burp" ?

= Chuck

Chuck, I think it may just be that everyone makes up their own description for the same thing. I can only speak from the perspective of the AMS MS pump. When I squeeze it initially the resistance gives way and it "feels" like a "pop", which is obviously releasing the valve mechanism. But I can't actually hear anything, and my hearing is excellent - I can hear a pin drop three rooms away . I imagine it's possible that some guys could have slightly noisy pumps that do make a sound. As I've broken the implant in I now do sometimes hear a slight noise when deflating, vaguely like a slow air leak in a tyre. I doubt anyone else could hear it though.
John

John and LGXDownUnder, thanks a ton for your responses. By the 'pop' sound, i of course meant releasing the valve mechanism/ feeling the resistance unlock. My issue is that when I give that first firm and quick pump, I am unable to release the valve mechanism. It takes me several attempts. Are you both able to do it in the first attempt? I mean I am unable to put it in the inflate mode. Any guidance from any of my bionic bros on how to do this would be highly appreciated

Sub you have to press the pump slowly less than half pump until you hear the plop, if you don't hear it let go of the pump and rotate your fingers pumping less than half pump in another point, you will see that you will be able to unblock it, once you have understood the mechanism after 2/3 times you will see that you will not make any more mistakes, the other thing to put the valve in deflation mode that you will need when inflating to hear the plop, at the end of deflation you have to give a firm squeeze at the end of the base of the penis, this will serve to block the valve

[subhash]

Chuck, I think it may just be that everyone makes up their own description for the same thing. I can only speak from the perspective of the AMS MS pump. When I squeeze it initially the resistance gives way and it "feels" like a "pop", which is obviously releasing the valve mechanism. But I can't actually hear anything, and my hearing is excellent - I can hear a pin drop three rooms away . I imagine it's possible that some guys could have slightly noisy pumps that do make a sound. As I've broken the implant in I now do sometimes hear a slight noise when deflating, vaguely like a slow air leak in a tyre. I doubt anyone else could hear it though.
John

John and LGXDownUnder, thanks a ton for your responses. By the 'pop' sound, i of course meant releasing the valve mechanism/ feeling the resistance unlock. My issue is that when I give that first firm and quick pump, I am unable to release the valve mechanism. It takes me several attempts. Are you both able to do it in the first attempt? I mean I am unable to put it in the inflate mode. Any guidance from any of my bionic bros on how to do this would be highly appreciated

Sub you have to press the pump slowly less than half pump until you hear the plop, if you don't hear it let go of the pump and rotate your fingers pumping less than half pump in another point, you will see that you will be able to unblock it, once you have understood the mechanism after 2/3 times you will see that you will not make any more mistakes, the other thing to put the valve in deflation mode that you will need when inflating to hear the plop, at the end of deflation you have to give a firm squeeze at the end of the base of the penis, this will serve to block the valve

Frankkk these are truly useful suggestions and I shall definitely follow them the next time I inflate. Wil get back. thanks a ton. i awlays thought the first push must be hard and sudden but i will try it slowly next time.

DownUnder, I have the AMS LGX MS pump. yes, have tried many times to first press deflate and then pump but it does not seem to work most of the time. Thanks

[frank66665]

John and LGXDownUnder, thanks a ton for your responses. By the 'pop' sound, i of course meant releasing the valve mechanism/ feeling the resistance unlock. My issue is that when I give that first firm and quick pump, I am unable to release the valve mechanism. It takes me several attempts. Are you both able to do it in the first attempt? I mean I am unable to put it in the inflate mode. Any guidance from any of my bionic bros on how to do this would be highly appreciated

Sub you have to press the pump slowly less than half pump until you hear the plop, if you don't hear it let go of the pump and rotate your fingers pumping less than half pump in another point, you will see that you will be able to unblock it, once you have understood the mechanism after 2/3 times you will see that you will not make any more mistakes, the other thing to put the valve in deflation mode that you will need when inflating to hear the plop, at the end of deflation you have to give a firm squeeze at the end of the base of the penis, this will serve to block the valve

Frankkk these are truly useful suggestions and I shall definitely follow them the next time I inflate. Wil get back. thanks a ton. i awlays thought the first push must be hard and sudden but i will try it slowly next time.

DownUnder, I have the AMS LGX MS pump. yes, have tried many times to first press deflate and then pump but it does not seem to work most of the time. Thanks

When deflating, don't forget to give the base of the penis a firm squeeze as a final push. This will lock the pump/valve into inflation mode. The next time you use it, the pump will plop. As for the thread name, it used to take me 2 minutes and about 40 pumps. Now, at 130 days, it takes me 1 minute and 30 pumps. At this point, I'm 80-90% hard enough for anal sex, 26-28 for oral sex, and another 7-8 pumps beyond 30 for cycling and being incredibly hard, almost uncomfortable.