implant failure

The final frontier. Deciding when, if and how.
Merlinthewise1
Posts: 7
Joined: Thu Jan 20, 2022 10:01 pm

implant failure

Postby Merlinthewise1 » Mon Jan 24, 2022 2:11 pm

hi there i am new here from canada.My implant was working up to yesterday when it wouldnt inflate i had a ams 700 implant 10 years ago.when i squeezed the bulb it flattened would not refill ..can anyone help me.i would really apreciate it

User avatar
Quincy
Posts: 413
Joined: Tue Mar 27, 2012 6:03 pm
Location: Boise, ID

Re: implant failure

Postby Quincy » Mon Jan 24, 2022 2:20 pm

I have an AMS 700 LGX. I have found it doing the same thing several times, but it was always a problem with the valve. I guess it sometimes gets trapped into an "in between" state. As you said, I could push the bulb flat, but it would not refill. My solution has been to very firmly press the deflate button, more than I normally would, to make sure it was fully moved into the inflate position. That has always solved the issue. Sometimes I had to try a couple of times, while pushing the bulb in between tries to help get the valve fully into the position where it would move correctly during the button push.

I hope it resolved for you.

Q.
71, Boise area, Married
ED from type 2 diabetes and PCa radiation.
AMS LGX surgery 6/5/18 with Edward Karpman in Silicon Valley, 18cm+3RTE

confused95
Posts: 219
Joined: Tue Mar 23, 2021 4:25 am

Re: implant failure

Postby confused95 » Mon Jan 24, 2022 2:42 pm

I hope you can solve your issues!
May I ask you much have you used it and your age?
Twice a week? Once a week?
26yo from Italy. Psychogenic ed since dec 2019, got worse in Jan 2021. On Cialis 5mg every 24hrs, it works! But masturbation and sex bring me a lot of anxiety. On talk-therapy.
Update: diagnosed with slight Peyronie’s, investigating more on that

User avatar
SWorks17
Posts: 364
Joined: Sat Jan 15, 2022 4:33 pm
Location: Garden Ridge, Texas

Re: implant failure

Postby SWorks17 » Mon Jan 24, 2022 4:41 pm

Merlin, I got my AMS instructional video CD out and reviewed the troubleshooting on the pump.

1. It said if the pump bulb is flatten out and won't refill - first try depressing the deflation button to refill the inflation bulb

2. If that doesn't work it says to reset the pump by pressing on either side of the block and also depressing the deflation button at the same time to reset the pump and to refill the bulb. Then try and pump the bulb if it has refilled

3. It also said that some of the tubes could be kinked, do pull out on your penis, then up and down and side to side several times to possibly unkink any tubing problem.

Good Luck,
Hope this works
Age 65, Garden Ridge Texas, Progressive ED after Boston Scientific Rezum procedure for benign enlarged prostate 19 May 21, AMS LGX 18 w 3cm rear tips installed 5 Nov 2021 by Dr Shane Barney, Brooke Army Medical Center, San Antonio, Texas, Married 35 years

Merlinthewise1
Posts: 7
Joined: Thu Jan 20, 2022 10:01 pm

Re: implant failure

Postby Merlinthewise1 » Tue Jan 25, 2022 8:30 pm

confused95 wrote:I hope you can solve your issues!
May I ask you much have you used it and your age?
Twice a week? Once a week?

i am 62 and use it about 3 times a week.at least i was

javon99
Posts: 18
Joined: Wed Oct 22, 2014 4:31 pm

Re: implant failure

Postby javon99 » Thu Jan 27, 2022 12:49 am

I have an AMS CX that the surgeon says it has a "sticky" pump. When I have that situation as you are describing, I squeeze my penis aggressively while pushing the deflation button with the other hand. Then, squeeze the pump as hard as you can to totally deflate it. That usually resets the pump and the bulb fills up again. The next squeeze on the bulb almost always snaps into the inflate mode after doing that. If not, try it again. I have always been able to reset it that way. (It has been 6 years since my implant, and it seems less of a problem now than it was when the implant was new.) I hope this helps.
73, total ED since 7/2014 after DaVinci prostatectomy. Tried all ED options. Even "super trimix" injections failed.
9/15/2016 Implant with AMS CX 21cm w/ 3 cm RTE's, infrapubic.
Disappointed with downward pointing erection.

Merlinthewise1
Posts: 7
Joined: Thu Jan 20, 2022 10:01 pm

Re: implant failure

Postby Merlinthewise1 » Thu Jan 27, 2022 5:50 pm

i dont understand what you mean when you said squeeze the pump as hard as you can to completly deflate it.can you clarify.thnks

newbie443
Posts: 1826
Joined: Fri Dec 01, 2017 9:41 pm
Location: Sedgwick county, Kansas USA

Re: implant failure

Postby newbie443 » Thu Jan 27, 2022 8:38 pm

https://www.youtube.com/watch?v=qwp0YfSLxIU At 8:50 in that video starts the trouble shooting section. You can also contact your AMS rep or check with your doctor.

But try pushing the deflate button hard and holding it to see if the bulb fills.
Injections failed. Implanted 3-21-18 AMS 700 LGX 21 + 1 RTE 100 cc reservoir 6.5" L 5" G Dr. Kramer.

Proximal Perforation Sling Repair 4/13/21 Dr. Broghammer

66 years young.

Will show and tell and talk with others.

Merlinthewise1
Posts: 7
Joined: Thu Jan 20, 2022 10:01 pm

Re: implant failure

Postby Merlinthewise1 » Thu Jan 27, 2022 8:47 pm

when i push the deflate button the balls fills with fluid but when i squeeze the ball it flattens out and doesnt refill

newbie443
Posts: 1826
Joined: Fri Dec 01, 2017 9:41 pm
Location: Sedgwick county, Kansas USA

Re: implant failure

Postby newbie443 » Thu Jan 27, 2022 9:51 pm

Ok. You can follow the trouble shooting guide in the video above. Follow the order in the video and add squeezing the ends of the pump block (the rectangular block that has the deflate button) in toward the deflate button. If that does not resolve the problem there is a fix not on the video. It is a reset for the pump but it has restrictions. As yours has been working I think you can use it but if you want to contact your rep first that might be safer yet. This fix is not to be done early on and my rep had questions for me when I was having trouble at activation so there seems to be a bit of risk with it. All the information by AMS states not to squeeze the bulb of the pump and the deflate button at the same time. But the reset is js to do that. Push the deflate button in to fill the pump bulb. The either keep pushing th deflate button or readjust things so you can make a firm full squeeze of the bulb while holding the deflate button fully down. Again I did this with contact with an AMS rep and you may want to contact your AMS rep or doctor before doing this. It is always best to let your AMS rep know if you have problems that are not resolved with the trouble shooting guide in that video. This gives them a record of problems and will help them help all of us with improvements and ways to keep our devices working well for a long time. It also has the problem on file if replacement is needed for possible warranty.

Let us know what happens.
Injections failed. Implanted 3-21-18 AMS 700 LGX 21 + 1 RTE 100 cc reservoir 6.5" L 5" G Dr. Kramer.

Proximal Perforation Sling Repair 4/13/21 Dr. Broghammer

66 years young.

Will show and tell and talk with others.


Return to “Implants”

Who is online

Users browsing this forum: No registered users and 69 guests