first timer

Sticking a needle Where? Courage, guidance and help.
frank53
Posts: 36
Joined: Sat Sep 24, 2016 10:36 pm
Location: mid west usa

first timer

Postby frank53 » Sun Sep 25, 2016 1:47 pm

started friday night with a bimix pge12mcg pta1mg/ml have not seen this mix on this site ? it said to start with a .05 and up .05 increments. got nothing at .05 going to try .20 to tonight . any thoughts from the long time user . need help thank
born 53 ,married in 73 have had ED issues for 20 yr ,high blood pressure.diabetes , implanted 11 /6/18 with Coloplast Titan 20cm,2cm rte

Cigar56
Posts: 684
Joined: Fri Aug 15, 2014 10:56 am

Re: first timer

Postby Cigar56 » Sun Sep 25, 2016 2:20 pm

frank53 wrote:started friday night with a bimix pge12mcg pta1mg/ml have not seen this mix on this site ? it said to start with a .05 and up .05 increments. got nothing at .05 going to try .20 to tonight . any thoughts from the long time user . need help thank


Hi Frank,

Welcome!

You will get lots of advice here from users of both bimix and trimix (which is what I use). I would advise that you follow your doctor's advice and increase your dosage very slowly. I would not go from 0.5 to .20.

Try .10 tonight, then .15 after 1 or 2 days, and finally .20. We know you are anxious to see some real wood, but we don't want you headed to the hospital with a six-hour erection, either. Take it easy until you find out how your body responds to the drug. As you gain more experience you'll be able to perfect your dosing -- but go slow.

Keeping checking in with us to report on how you're doing.

Good luck!
I've tried everything -- pills, injections pumps -- and now I am at the final frontier.

frank53
Posts: 36
Joined: Sat Sep 24, 2016 10:36 pm
Location: mid west usa

Re: first timer

Postby frank53 » Mon Sep 26, 2016 9:37 am

Well tried .20 last night sill nothing, well maybe a 2 out of 10, not good enough to do it. How do you now if you hit the urethra? I may have hit it thanks for all the info I CAN GET, this site is great! need help
born 53 ,married in 73 have had ED issues for 20 yr ,high blood pressure.diabetes , implanted 11 /6/18 with Coloplast Titan 20cm,2cm rte

newbie1
Posts: 143
Joined: Mon Sep 29, 2014 5:27 pm

Re: first timer

Postby newbie1 » Mon Sep 26, 2016 12:03 pm

Hi
You stated your dosage of bimix is
bimix pge12mcg pta1mg/ml

that does not sound like bimix. Bimix does not have pge1 in it.
ED many years, failed PDE5i, on Trimix but recently needing large increasing strengths and doses

newbie1
Posts: 143
Joined: Mon Sep 29, 2014 5:27 pm

Re: first timer

Postby newbie1 » Mon Sep 26, 2016 12:05 pm

Also Can you verify your mixture?
Is it pge1 2 mcg or is it pge 12 mcg?
That could make a big difference.
ED many years, failed PDE5i, on Trimix but recently needing large increasing strengths and doses

frank53
Posts: 36
Joined: Sat Sep 24, 2016 10:36 pm
Location: mid west usa

Re: first timer

Postby frank53 » Mon Sep 26, 2016 12:25 pm

I agree it does not sound like bimix, but the uro dr and pharmacist call it that. it is PEG1 12mcg- pta 1mg that is what on bottle thanks
Last edited by frank53 on Sun Oct 02, 2016 12:25 am, edited 1 time in total.
born 53 ,married in 73 have had ED issues for 20 yr ,high blood pressure.diabetes , implanted 11 /6/18 with Coloplast Titan 20cm,2cm rte

newbie1
Posts: 143
Joined: Mon Sep 29, 2014 5:27 pm

Re: first timer

Postby newbie1 » Mon Sep 26, 2016 5:19 pm

Irrespective of what they call it, may be you should verify the dosages with the pharmacist.
If it is 2 mcg for pge1, then the strength is very very low compared with usual dosage. The usual dosage for pge1 is about 10 mcg for most users and some users here have used up to 120 mcg (that is mega dose). Then that could explain why you have no reaction even with 0.2 ml. You may need a lot more than that.
But be safe, verify with the pharmacist what the exact drugs are and what the respective strength of each drug is in your prescription is before we can make any further comments.
ED many years, failed PDE5i, on Trimix but recently needing large increasing strengths and doses

Cigar56
Posts: 684
Joined: Fri Aug 15, 2014 10:56 am

Re: first timer

Postby Cigar56 » Mon Sep 26, 2016 5:54 pm

Keep increasing your dosage until you see some results. Your last dosage -- .20 -- is 20 units on a 1 ML syringe. By comparison, my dosage is 100 units . Everybody is different. Maybe you will find that with your current formula, you'll need 100 units too. Keep experimenting until you hit the spot.
I've tried everything -- pills, injections pumps -- and now I am at the final frontier.

postra7777
Posts: 154
Joined: Tue Aug 23, 2016 1:10 pm

Re: first timer

Postby postra7777 » Mon Sep 26, 2016 5:59 pm

Frank53, how are you injecting yourself? Autoinjector or the conventional stick and plunger? The reason I ask is every time I used the autoinjector I missed the spot. I finally decided to just use the syringe to make sure I hit the spot. What I do is stick it in and pull the plunger out slightly and see if I see a little blood going back into the syringe (suggested by someone on this board). Once I see blood I press the plunger and all works fine. When I don't see blood I restick and repeat. This method has worked in every case except one.
Suffered with ED for most of my life. Viagra then to Trimix then implanted 3/8/2018 with AMX 700 CX 21cm with 1cm RTE. 50 years old Urolift procedure performed 30 day prior to my implant surgery.

frank53
Posts: 36
Joined: Sat Sep 24, 2016 10:36 pm
Location: mid west usa

Re: first timer

Postby frank53 » Mon Sep 26, 2016 6:41 pm

I use a conventional 1ml syringe 1/2 in 30g. I did pull back to get a little blood. I may need a 5/16. I have a call in to my uro Dr. she has not returned my call yet. to verify the mix. thanks for info Guys
born 53 ,married in 73 have had ED issues for 20 yr ,high blood pressure.diabetes , implanted 11 /6/18 with Coloplast Titan 20cm,2cm rte


Return to “Injections”

Who is online

Users browsing this forum: No registered users and 24 guests