Needle Length

Sticking a needle Where? Courage, guidance and help.
zachcrane
Posts: 2
Joined: Tue Sep 01, 2020 5:20 pm

Needle Length

Postby zachcrane » Sat Oct 17, 2020 6:38 pm

Ive been using 1/2inch Needle 30gauge and there is always discomfort when injecting on the 3 and 9 o'clock sides. I tend to inject very very slowly. It seems to take me a minute to insert the entire thing.

Do I just have a very thick cavernosa causing the discomfort? Its not pain but it definitely feels like something is going through it.

I tried using 5/16 and there is no discomfort but haven't had as good of erections.

Does anyone else have this same issue? I haven't tried injecting anywhere other than 3pm and 9pm.

Also my erections always seem to last 4-5 hours when I do them right and i'm only using 5 units. Do you think I would find success with 2 or 3 units for less than 4 hours? OR is my mix too strong?

My mix is PAP 30 / PHE 1/ PGE 25

Leebert
Posts: 220
Joined: Wed Aug 07, 2019 9:51 pm

Re: Needle Length

Postby Leebert » Sat Oct 17, 2020 10:44 pm

You might try dropping down to 30/1/10, it's the weakest strength of tri mix and see if that at least cuts time in half, but not sure if it will affect hardness or not. I'm on 30/2/50 and it's not working well at all and not sure what to do with that! Anyhow see if that works. The injections are a trial and error, patience ( which can get thin) and mentally draining until you get it right if you can.
I'm 64 yrs young, heart stent 10 yrs ago, mod. high sugar, HBP, married 45 yrs, retired. Heart attack, 2 strokes. No damage, except start of Ed, Ugh! Live in Ada Michigan. 8/8/19 started injections, now tri mix 30/2/50

Leebert
Posts: 220
Joined: Wed Aug 07, 2019 9:51 pm

Re: Needle Length

Postby Leebert » Sat Oct 17, 2020 10:46 pm

Another thing, I use 31g, 5/16 and when sticking my dick I just kind of jiggle it in until I get into the CC.
I'm 64 yrs young, heart stent 10 yrs ago, mod. high sugar, HBP, married 45 yrs, retired. Heart attack, 2 strokes. No damage, except start of Ed, Ugh! Live in Ada Michigan. 8/8/19 started injections, now tri mix 30/2/50

User avatar
ShouldIwait
Posts: 15
Joined: Fri Apr 03, 2020 12:36 am
Location: So Calif

Re: Needle Length

Postby ShouldIwait » Sun Oct 18, 2020 1:30 am

could switch to bimix...not as strong and does not need to be refrigerated!
ED 10-12 years. Pills stopped working now on Quad Mix. Considering implant :?

bldoink
Posts: 1932
Joined: Mon Apr 03, 2017 12:58 am
Location: Fl.

Re: Needle Length

Postby bldoink » Sun Oct 18, 2020 11:22 am

Use whatever length works best for you. I use 31 gauge 5/16". When using the 5/16" I insert the whole length of the needle plus indent myself with the plastic nub of the needle syringe. Also make sure you use the .3cc (1/3cc) volume syringes for such a small dose.

You may also want to consider buying some bacteriostatic water and diluting your mix, if you feel comfortable doing that. You might want to consult your pharmacist if needed.
Last edited by bldoink on Sun Oct 18, 2020 2:16 pm, edited 1 time in total.
R.R.P 2011 Mayo Jacksonville, Dr. Michael Wehle. Nerve sparing - badly damaged. C in margin. V.E.D, Viagra and PGE-1 (80mcg/ml) injections @ ~ 14 units. Originally Edex20, then compounded PGE-1 - cost. Inject. ~ 9 yrs. It works. Treasure coast of FL.

notaes
Posts: 434
Joined: Sat Mar 23, 2019 8:54 am

Re: Needle Length

Postby notaes » Sun Oct 18, 2020 12:25 pm

I learned very quickly that my pharmacists was a great source of info regarding lots of things. Needle length was one of those things. He talks to a lot of folks about what works best etc. He is a great trusted friend also. Highly recommend talking to one you really like and developing a good relationship with him/her.
66 yr old male married 36 yrs use trimix four yrs, cilais and Viagra. trimix work well developed scarring on both sides had implant 1/9/2020 at UT Med Ctr, Knoxville, TN Dr. John Lacy.

zachcrane
Posts: 2
Joined: Tue Sep 01, 2020 5:20 pm

Re: Needle Length

Postby zachcrane » Sun Oct 18, 2020 10:56 pm

ShouldIwait wrote:could switch to bimix...not as strong and does not need to be refrigerated!


Here's a thought I had. If the Alprostadil/PGE1 is what's causing the ache couldn't I turn the Trimix into Bimix by leaving it out at room temp?

I think that's the only ingredient that needs to be kept refrigerated in order to work. Otherwise you just have bimix correct?

I currently have 10ML of the trimix formula so I guess I'd want to be certain its the PGE1 that is causing the ache so I could fill a syringe and leave it out for a few days and then test to see it if works?

bldoink
Posts: 1932
Joined: Mon Apr 03, 2017 12:58 am
Location: Fl.

Re: Needle Length

Postby bldoink » Sun Oct 18, 2020 11:31 pm

zachcrane wrote:
ShouldIwait wrote:could switch to bimix...not as strong and does not need to be refrigerated!


Here's a thought I had. If the Alprostadil/PGE1 is what's causing the ache couldn't I turn the Trimix into Bimix by leaving it out at room temp?

I think that's the only ingredient that needs to be kept refrigerated in order to work. Otherwise you just have bimix correct?

I currently have 10ML of the trimix formula so I guess I'd want to be certain its the PGE1 that is causing the ache so I could fill a syringe and leave it out for a few days and then test to see it if works?

That might work to some degree but I think I'd be a bit concerned about bacteria growth leaving it out for an extended time. There's also the consideration of the Alprostadil being the most potent ingredient. Also some research has suggested that the Alprostadil is the ingredient least likely to cause dick damage.
R.R.P 2011 Mayo Jacksonville, Dr. Michael Wehle. Nerve sparing - badly damaged. C in margin. V.E.D, Viagra and PGE-1 (80mcg/ml) injections @ ~ 14 units. Originally Edex20, then compounded PGE-1 - cost. Inject. ~ 9 yrs. It works. Treasure coast of FL.


Return to “Injections”

Who is online

Users browsing this forum: No registered users and 5 guests