Autoject EI wit SureComfort syringes

Sticking a needle Where? Courage, guidance and help.
c0r5a38
Posts: 13
Joined: Tue Nov 15, 2016 8:36 pm

Autoject EI wit SureComfort syringes

Postby c0r5a38 » Fri Mar 06, 2020 11:44 am

For 3-4 years I've had success using Autoject with BD .5cc -29 gauge - 1/2 inch syringes. Had a few instances where there's been misfires so I decided to purchase a new Autoject and switch to the SureComfort 1cc syringe. The Autoject instructions do not list SureComfort syringes on the the depth setting chart. Does anyone use this combination? Need to know how to set the depth on the Autoject. Thanks.
Diagnosed May 2012 with prostate cancer, 3.3 Gleason, active surveillance until February 2016 when biopsy result was Gleason 3.4. Radical prostatectomy performed by Dr. Peter Scardino at Sloane.

mcdave555
Posts: 51
Joined: Wed Nov 27, 2019 4:41 pm
Location: Arizona _ Canada
Contact:

Re: Autoject EI wit SureComfort syringes

Postby mcdave555 » Fri Mar 06, 2020 8:25 pm

I have not used autojet , but found the 1/2 inch needles have bent a few times so do inject properly, I use 7/16 long and had no troubles getting the juice in the right spot. Dave in AZ

INDIANA BONES
Posts: 39
Joined: Wed Jan 03, 2018 9:58 am

Re: Autoject EI wit SureComfort syringes

Postby INDIANA BONES » Fri Mar 06, 2020 9:44 pm

Suggest you install an empty syringe and measure length of needle sticking out the end after firing


Return to “Injections”

Who is online

Users browsing this forum: No registered users and 33 guests