Process for starting injectables

Sticking a needle Where? Courage, guidance and help.
Robert-CA
Posts: 32
Joined: Sat Oct 15, 2016 5:19 pm

Process for starting injectables

Postby Robert-CA » Thu Jun 14, 2018 6:06 pm

My urologist had me come into the office and showed me how to do the injection with a minimal dose. He then told me to increase the dose in small increments until I was able to achieve a satisfactory erection. (Let's call this process A)

I have heard from others that their doctors had them come back to the office for repeated injections until they found the right dosage. (Process B)

So I am curious about other guys who use injectables. Did your doctor use Process A or B?

Reggieman
Posts: 228
Joined: Sat Jun 04, 2016 7:17 pm
Location: Central California

Re: Process for starting injectables

Postby Reggieman » Thu Jun 14, 2018 7:40 pm

Doc injected me in his office with 30 units of Bimix. Too much so they had to draw blood from my penis and gave me a shot in the penis to help it go flaccid. He sent home home with instructions to use 15 units. I found that I can use even less and get the same effect.
Retired. R.P. 2016. Bilateral nerve sparing surgery. Now use .15cc of Bimix twice weekly & anorgasmia, moderately incontinent. Wife no longer interested so go solo with Electro-stim using Erostek ET-312. Now am Type 2 diabetic.

once a writer
Posts: 250
Joined: Tue Jan 07, 2014 5:53 pm
Location: Oregon

Re: Process for starting injectables

Postby once a writer » Thu Jun 14, 2018 8:39 pm

I had my initial injection in the office. After that I was on my own.
Eugene, Oregon, USA. Born 1941. Married 1968. ED since mid-1990s. Began trimix January 2014. Dosage gradually increased over time. Added cock ring in 2016. After dosage reached 30 units, switched to quad mix in May 2018. On blood pressure meds.

User avatar
bldoink
Posts: 3715
Joined: Mon Apr 03, 2017 12:58 am
Location: Fl.

Re: Process for starting injectables

Postby bldoink » Thu Jun 14, 2018 9:10 pm

Process C. The doctor wrote me a script for Edex 10. I read and followed the instructions in the insert. At next appointment I told the doctor that it didn't work. He wrote me a script for Edex 20. I again followed insert instructions. It worked. It actually worked a bit too good and gave me some dick ache so I didn't inject the full ml the next time.
R.R.P 2011 Mayo Jacksonville, Dr. M. Wehle. Nerve sparing - damaged. C in margin. Radiation 2023, V.E.D, Viagra and PGE-1 (80mcg/ml) injections @ ~ 14 units. Originally Edex20, then compounded PGE-1 - cost. Inject. 12 yrs. It works. Treasure coast of FL.

Alanoc8
Posts: 158
Joined: Thu Aug 31, 2017 8:11 am

Re: Process for starting injectables

Postby Alanoc8 » Fri Jun 15, 2018 4:08 pm

My Uro injected me in his office with 10 units. I just got a semi not hard enough for sex. He told me to increase it by 5 units until I reached a dose that would get me fully erect. I'm currently using 30 units and getting a great erection.
75 yrs. old. Married. I used viagra from 2007 t0 2017. I have venous leakage. I started injections in September 2017. I've used the Xialla cock ring along with Trimix since June 2020 with excellent results. I pump on a daily basis to maintain my size.

tomas1
Posts: 1954
Joined: Tue Jul 23, 2013 5:12 pm
Location: Tempe, AZ

Re: Process for starting injectables

Postby tomas1 » Fri Jun 15, 2018 5:19 pm

A
85 years
Inject testosterone weekly.
Implant on 1/22/19 by Dr Avila.
Scrotal, hor. incision just over 1"
18cm AMS 700 CX, 3.5cm RTE 100cc res
Gleason 6 prostate cancer. Monitoring it for now.
Update: On my last biopsies the cancer wasn't found.

keysdude
Posts: 82
Joined: Fri Apr 07, 2017 8:16 pm

Re: Process for starting injectables

Postby keysdude » Fri Jun 15, 2018 6:45 pm

Robert-CA
My uro gave me my first shot, 5 units, and had me wait for reaction. 5 -25 min got major hard on. Sent me home with instructions and what to look for. Next appt 2 weeks later he had me self inject. No problem other than major case of nerves. That was it other than seeing him every few months just to ask how I've been doing with the injections.
Been injecting 1 -2 times a week for about 15 months or so. It's been working out fine. I did up the dosage to 8-10 units

Bob1974
Posts: 170
Joined: Fri Apr 06, 2018 8:37 am
Location: Tampa Bay, Florida USA

Re: Process for starting injectables

Postby Bob1974 » Sat Jun 16, 2018 2:41 pm

Process A... urologist gave me my 1st injection of 40/30/1 Trimix .01 or 10 units and did early in the afternoon(2pm) in case there was an issue. After 3.5 hours took 4 30mg Sudafed and put ice on it and by 7pm I was good. Still trying to find right dosage as 4 units still seems too strong for me.
Age 47. Married in 2005. Tampa Bay Florida USA. Got ED 24 years ago from being paralyzed. Made a 90% recovery. See profile for more info...

Larry10625

Re: Process for starting injectables

Postby Larry10625 » Sat Jun 16, 2018 2:45 pm

Robert-CA wrote:My urologist had me come into the office and showed me how to do the injection with a minimal dose. He then told me to increase the dose in small increments until I was able to achieve a satisfactory erection. (Let's call this process A)

I have heard from others that their doctors had them come back to the office for repeated injections until they found the right dosage. (Process B)

So I am curious about other guys who use injectables. Did your doctor use Process A or B?



A for me.

Larry

graymare
Posts: 109
Joined: Thu Feb 19, 2015 3:50 pm

Re: Process for starting injectables

Postby graymare » Sat Jun 16, 2018 10:22 pm

A for me. But when I got my initial injection, they gave me a porn magazine and told me to look through that for 10 minutes. Then they came back to do a penile color doppler ultrasound. The porn was a waste of their money.
Married, 66 yrs old, ED for 22 yrs. On TriMix for 5 yrs. Live in the Adirondacks of NY. Would be a nudist if it weren't for the black flies and the short summers. :D


Return to “Injections”

Who is online

Users browsing this forum: No registered users and 25 guests