Bent needle

[owasso]

Inserted and was hard to press, pulled out and needle was bent, okay or not?

[Comatose]

Inserted and was hard to press, pulled out and needle was bent, okay or not?

When I first started injecting, I bent the needle too. So not being thrilled with sticking a needle in my penis, I switched to trimix intraurethral gel which works great for masturbating.

[bldoink]

Inserted and was hard to press, pulled out and needle was bent, okay or not?

I'm not sure what you're asking. I've bent a needle a couple of times. I think both times I was losing my grip and bent it while rearranging my grip. No harm done. If you found the plunger hard to depress you could have been in the wrong tissue or it was hard to depress because the needle was bent closing off the hole. Pushing the juice into the wrong tissue can hurt. I suspect you're just fine. Carry on.

[Martin6469]

Agree with bldoink. I bend it when I hit the hard tunica (corpus casing) at a glancing angle instead of plumb. I straighten the needle, disinfect it in a cotton ball, and try again.

[ElbowRoom]

As long as it didn’t break off inside you’re fine.

[TOSDMS]

Had it happen a couple of times in 4 years using trimix i think it's because the needles are sometimes dull from the manufacturer other wise the needles just slide in with no effort