Constriction rings as a new discussion subject

Anything goes when it comes to ED.
ocitgo
Posts: 397
Joined: Wed Jan 01, 2014 8:48 pm
Contact:

Constriction rings as a new discussion subject

Postby ocitgo » Wed Mar 15, 2017 6:19 pm

May I suggest Constriction Rings as a separated discussion topic. I have bought several without user knowledge. It is more complex than I expected and affects the outcome of several other discussion topics.
ocitgo (Bob F), Bremerton, WA
Implanted 11/13/2017 AMS 700LGX 15 cm, leak, 3 cm rear tip
Implanted 06/17/2019 AMS 700LGX 18 cm, 1.5 cm rear tip

ocitgo
Posts: 397
Joined: Wed Jan 01, 2014 8:48 pm
Contact:

Re: Constriction rings as a new discussion subject

Postby ocitgo » Thu Mar 16, 2017 4:28 am

I have one of these displayed on 2 of their websites. It works well for me by itself and better with a low dose of Trimix. It has taken a few weeks to master. I have been using trimix with mixed result for about 2 yrs. They don't have user reviews. The 1st ring I bought I didn't like.

http://allknight.com/products/cock-enha ... kring.aspx

http://myhardwear.com/
Last edited by ocitgo on Sun Mar 19, 2017 6:06 am, edited 1 time in total.
ocitgo (Bob F), Bremerton, WA
Implanted 11/13/2017 AMS 700LGX 15 cm, leak, 3 cm rear tip
Implanted 06/17/2019 AMS 700LGX 18 cm, 1.5 cm rear tip

sliphill
Posts: 1021
Joined: Mon Oct 29, 2012 8:27 am
Location: Charlotte, NC

Re: Constriction rings as a new discussion subject

Postby sliphill » Sat Mar 18, 2017 11:57 pm

I got one of these coming.

http://allknight.com/products/cock-enha ... -ring.aspx

I used an Obson ring tonight, and I think it was too small. I think I used too much trimix as well. It got me hard but it was real painful. Did not enjoy at all. I'm done with rings that go around the shaft only. I didn't have the ring on that long as it was too painful. When I removed it, I had broken vessels all over the place. I think I made my leak worse. We'll see how this one from allknight.com works? If it doesn't work, it might be implant time. I'm seeing a doctor on the 3rd of April.
Ed (sliphill) 68

Implanted by Dr. Michael O'Neill in Charlotte, NC on 6/9/2017 with AMS 700LGX. 18 cm cylinders 3 cm RTE's.

Revision done by Dr. Maxim McKibbon in Charlotte, NC on 4/12/2023 with AMD 700 LGX 22 cm cylinders gm

ocitgo
Posts: 397
Joined: Wed Jan 01, 2014 8:48 pm
Contact:

Re: Constriction rings as a new discussion subject

Postby ocitgo » Sun Mar 19, 2017 4:00 am

http://allknight.com/products/

Please give us a report.
ocitgo (Bob F), Bremerton, WA
Implanted 11/13/2017 AMS 700LGX 15 cm, leak, 3 cm rear tip
Implanted 06/17/2019 AMS 700LGX 18 cm, 1.5 cm rear tip

sliphill
Posts: 1021
Joined: Mon Oct 29, 2012 8:27 am
Location: Charlotte, NC

Re: Constriction rings as a new discussion subject

Postby sliphill » Sun Mar 19, 2017 4:49 am

ocitgo wrote:http://allknight.com/products/

Please give us a report.


Will do. Should get it in a couple days.
Ed (sliphill) 68

Implanted by Dr. Michael O'Neill in Charlotte, NC on 6/9/2017 with AMS 700LGX. 18 cm cylinders 3 cm RTE's.

Revision done by Dr. Maxim McKibbon in Charlotte, NC on 4/12/2023 with AMD 700 LGX 22 cm cylinders gm

sliphill
Posts: 1021
Joined: Mon Oct 29, 2012 8:27 am
Location: Charlotte, NC

Re: Constriction rings as a new discussion subject

Postby sliphill » Tue Mar 21, 2017 3:47 pm

sliphill wrote:
ocitgo wrote:http://allknight.com/products/

Please give us a report.


Will do. Should get it in a couple days.


I got it yesterday, but it's too small! I have to send it back.
Ed (sliphill) 68

Implanted by Dr. Michael O'Neill in Charlotte, NC on 6/9/2017 with AMS 700LGX. 18 cm cylinders 3 cm RTE's.

Revision done by Dr. Maxim McKibbon in Charlotte, NC on 4/12/2023 with AMD 700 LGX 22 cm cylinders gm

sliphill
Posts: 1021
Joined: Mon Oct 29, 2012 8:27 am
Location: Charlotte, NC

Re: Constriction rings as a new discussion subject

Postby sliphill » Tue Mar 21, 2017 10:13 pm

sliphill wrote:
sliphill wrote:
ocitgo wrote:http://allknight.com/products/

Please give us a report.


Will do. Should get it in a couple days.


I got it yesterday, but it's too small! I have to send it back.


I'm sending it back tomorrow, and getting this one instead.

http://allknight.com/products/cock-enha ... -ring.aspx
Ed (sliphill) 68

Implanted by Dr. Michael O'Neill in Charlotte, NC on 6/9/2017 with AMS 700LGX. 18 cm cylinders 3 cm RTE's.

Revision done by Dr. Maxim McKibbon in Charlotte, NC on 4/12/2023 with AMD 700 LGX 22 cm cylinders gm

ocitgo
Posts: 397
Joined: Wed Jan 01, 2014 8:48 pm
Contact:

Re: Constriction rings as a new discussion subject

Postby ocitgo » Wed Mar 22, 2017 4:24 am

You ordered a penis ring and not the standard cock ring that go behind the balls. I only trust the one I have. It is all metal. My size is 2 in per their measuring system. You can ask for assistance.
My ring:
http://allknight.com/products/cock-enha ... kring.aspx

With it and Trimix 25 units I have a normal erection that last at least 20 minutes.
ocitgo (Bob F), Bremerton, WA
Implanted 11/13/2017 AMS 700LGX 15 cm, leak, 3 cm rear tip
Implanted 06/17/2019 AMS 700LGX 18 cm, 1.5 cm rear tip

sliphill
Posts: 1021
Joined: Mon Oct 29, 2012 8:27 am
Location: Charlotte, NC

Re: Constriction rings as a new discussion subject

Postby sliphill » Wed Mar 22, 2017 2:43 pm

ocitgo wrote:You ordered a penis ring and not the standard cock ring that go behind the balls. I only trust the one I have. It is all metal. My size is 2 in per their measuring system. You can ask for assistance.
My ring:
http://allknight.com/products/cock-enha ... kring.aspx

With it and Trimix 25 units I have a normal erection that last at least 20 minutes.


Ok, fortunately, I hadn't ordered it yet. I have to wait until they received the one I returned. I am going to order that one in size 2.0". The one I ordered was a size 1.5" and was way too small.
Ed (sliphill) 68

Implanted by Dr. Michael O'Neill in Charlotte, NC on 6/9/2017 with AMS 700LGX. 18 cm cylinders 3 cm RTE's.

Revision done by Dr. Maxim McKibbon in Charlotte, NC on 4/12/2023 with AMD 700 LGX 22 cm cylinders gm

sliphill
Posts: 1021
Joined: Mon Oct 29, 2012 8:27 am
Location: Charlotte, NC

Re: Constriction rings as a new discussion subject

Postby sliphill » Wed Mar 22, 2017 10:43 pm

Ok, changed my order to the 2.0" horseshoe and clip.
Ed (sliphill) 68

Implanted by Dr. Michael O'Neill in Charlotte, NC on 6/9/2017 with AMS 700LGX. 18 cm cylinders 3 cm RTE's.

Revision done by Dr. Maxim McKibbon in Charlotte, NC on 4/12/2023 with AMD 700 LGX 22 cm cylinders gm


Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 24 guests